Kodak DCS 410 - Manual (Page 175)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 Reference — Camera G 7-33
No power when using
the battery. The Nikon camera is
not on. Slide the Nikon camera power
switch to on.
The battery is
discharged. Charge the battery with the AC
battery charger/adapter, or operate
from the AC battery
charger/adapter.
No power to charge the
battery when using the
AC battery
charger/adapter. The cable from the AC
battery charger/adapter
to the camera back is
loose or not plugged
into the camera back. Make sure the cable is connected
to the camera back and seated
securely.
The AC battery
charger/adapter cable is
loose or not plugged in
at the wall. Make sure the cable is connected
to the wall and seated securely.
There is no power at
the power source. Have the power source repaired
and/or try another power source.
The AC battery
charger/adapter power
cable is faulty. Replace the cable.
The AC battery
charger/adapter is
faulty. Contact Kodak.
Troubleshooting the Camera
Trouble Possible Cause Suggested Solution