Kodak DCS 410 User Manual
Page 249
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reference — Kodak Driver Software G 8-53
Trouble
Possible Cause
Suggested Solution
The battery has become
exhausted while the
camera is connected to the
computer; the AC battery
charger/adapter is not
being used.
When the camera is
connected to a computer
that is on, and the
software driver window
is opened, the camera
will not go to sleep. This
can exhaust the battery if
it continues for an
extremely long period of
time (perhaps a month
or more) without
recharging.
Recharge the battery in the camera
back.
We recommend that you operate
the camera from the AC battery
charger/adapter when connected to
a computer.
You click the Take Picture
button, but no picture is
recorded.
The PCMCIA card in
camera is full (the disk
indicator is flashing).
Delete images from the PCMCIA
card, or use a different card if
available.
The camera is off.
Turn on the camera.
The camera is not
awake.
Wake the camera and try again.
You click the camera
shutter button but no
picture is recorded
The camera is off.
Turn on the camera.