Kodak DCS 410 - Manual (Page 202)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-6  Reference — Kodak Driver Software G
Commands
This section of the chapter describes each element of the driver image
window. The letter before each command corresponds to the letters
shown on the illustration at the start of this chapter.
NOTE: As you work with the driver, notice that all features are not always active;
instead, some choices are dimmed. This is normal operation, for all features are
not always applicable to the current settings and are therefore dimmed by the
driver. For example, when you are in T
EST S HOT , you can only work with one
image at a time. For that reason the navigation tools are dimmed since there are
no other images to which you can move.
A. S
OURCE
Menu
Macintosh:
TWAIN (PC):
Allows you to work with images from a camera connected to your com-
puter or from image archive files that you have previously copied to a
folder on your computer hard disk.