Kodak DCS 410 User Manual
Page 93
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Using the Camera G 5-3
B.
In the field without the AC battery charger/adapter. Before you go
into the field, you should charge the battery fully as described in
Chapter 4. Charging the battery for two hours will ensure the most
images per charge.
3. Turn on the camera by sliding the Nikon N90s power switch to ON.
The camera liquid crystal display (LCD) panel displays a variety of
current settings.
NOTES: There is no separate on/off switch on the camera back.
The camera top LCD will continuously display the
CUSTOM
signal. The
signal appears whenever the camera back is communicating with the camera,
for example directly after shooting.
The
signal, will always show that the Nikon N90s camera batteries
are good, even though there are no batteries in the Nikon N90s camera, and
even when the battery in the camera back is weak. This indicator should be
ignored.
MODE
DRIVE
OFF
Ps
Shutter release button
Power switch
ISO