Recording sound (optional) – Kodak DCS 410 User Manual
Page 104
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-14 Using the Camera G
Recording Sound (Optional)
You can record sound on the PCMCIA card via a microphone built into
the camera by following these steps.
1. Turn on and wake the camera.
2. Hold the camera back approximately six inches (15 cm) from your
mouth.
3. Press and hold the record button.
DELETE
SCSI ID
CARD BUSY
Record button
Microphone
4. Speak into the microphone.
5. Release the record button; the red Card Busy light blinks as the data
are recorded on the PCMCIA card.
The center dot of the disk icon on the camera back LCD comes on when
the recording button is pressed and segments of the disk icon bounce up