Kodak DCS 410 User Manual
Page 68
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-24 Preparing the Camera and the Computer G
III. Camera Used with a Macintosh PowerBook
or a PC Laptop
Follow the steps below to match your computer system, either a
Macintosh PowerBook (part A) or a PC Laptop (part B).
A. Macintosh PowerBook with No External
SCSI Devices
You can use the camera with a variety of PowerBook models (except do
not use the camera with the model 100). However, the information in this
section may not apply to all PowerBook models.
For this installation you will need to supply an HDI-30-pin to 25-pin
Macintosh PowerBook SCSI adapter cable. Do not use a terminator.
NOTE: This cable is available in two versions; be certain that your cable is no
longer than three feet long, and that you obtain a cable for connecting a
PowerBook computer to a SCSI device, not for connecting a PowerBook com-
puter to a desktop Macintosh computer.
25-pin Connector
HDI-30-pin Connector
PowerBook SCSI Adapter Cable