Kodak DCS 410 - Manual (Page 43)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 Quick Start G 3-5
NOTES: For earlier supported versions of Photoshop, choose the driver from
the A
CQUIRE submenu of the F ILE menu.
For other supported TWAIN applications on the PC, access the TWAIN driver
through the select-then-acquire process used by your application to access
the driver image window.
12. Format a PCMCIA card.
Your PCMCIA card must be (DOS) formatted by the camera. Format-
ting destroys any files that may be on the card. Click the camera
control icon as described in the previous step. Click F
ORMAT
, a one-
time process for each card you use. Refer to Chapter 4.
13. Take pictures with the camera.
The camera is now ready to take pictures. Use it while connected to a
computer and/or the AC battery charger/adapter. Or you can use the
camera without the computer or adapter. When you are finished with
the camera, you can leave it connected to the computer or you can
turn off the computer, then disconnect the adapter and the camera.
Refer to Chapter 5.
14. Record sound.
With the camera system on and awake, hold the back of the camera
about six inches (15 cm) from your mouth (the microphone is behind
four small holes centered at the top of the camera back). Press and
hold the record button (to the right and below the microphone), and
speak into the microphone. Refer to Chapter 5. Recorded sound files
can be played by the computer; they cannot be played by the camera.
Refer to Chapters 6 and 8.
15. Move images from the camera system to the computer.
With equipment off, reconnect the camera system to the computer (if
needed), run your application, access the driver image window as
described above. Thumbnails of pictures you have taken appear in the