Kodak DCS 410 - Manual (Page 258)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8-62  Reference — Kodak Driver Software G
“Can not recognize the
PCMCIA card in the
camera.
 Remove the card,
reinsert it firmly, and
try again.
 Confirm that the
battery is charged.
 The card may not be
formatted. To format
it, click the Camera
Control icon, then
click the Format
button.”
The card is not inserted
properly in the camera. Remove and reinsert the PCMCIA
card, then try again.
The battery needs
charging. Attach the AC adapter and charge
the battery.
The PCMCIA card in the
camera is not DOS
formatted, or has
become corrupted after
the driver has
successfully accessed it. Click the Camera Control icon,
then click the Format button to
format the PCMCIA card. This
action permanently erases any files
on the card.
Or, if a second PCMCIA card that
is known to be DOS formatted is
available, replace the current
PCMCIA card with the second
card.
“Can not save the
Preferences file. The
system disk may be full,
or may be locked, or you
do not have ‘write
privileges’ to the disk.” The system disk is full, or
is locked, or is write
protected, or there is a
problem with the system
disk. Create room on the system disk, or
unlock the disk, or remove write
protection from the system disk, or
have the system disk repaired.
Message Possible Cause Suggested Solution