Kodak DCS 410 - Manual (Page 261)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 Reference — Kodak Driver Software G 8-65
“General problem with
‘Take Picture.’” An unspecified problem
has occurred when you
clicked the Take Picture
icon. Close the driver, reopen it and try
again. If the problem continues,
click the Load Camera Firmware
button, and try again. If the
problem persists, reinstall the
driver.
“No ASPI software for
Windows was found.
Install or reinstall the
WINDOWS ASPI
software.” A problem has occurred
with your software ASPI
manager for Windows. Install, or reinstall, the ASPI
manager for Windows. This
software, which is not available
from Kodak, should be provided
with your ASPI Windows host
adapter card.
“Some items in this
location have the same
names as items you’re
copying. Do you want to
replace them with the
ones you’re copying?” While working within an
archive folder, you have
selected multiple images,
and clicked “Copy To;”
however, some images
with the same filenames
already exists in the
folder. Click OK to replace the archive
files with the selected files; or click
Cancel and no replacement occurs.
If you click OK, sound files are
replaced without notifying you.
“The action is canceled. It
can not click-balance
because the click point is
outside the image border.
(The action was recorded
on a picture from a
camera with a larger
imager.)” When the action is run,
the driver is unable to
complete a click-balance
operation. The picture
on which the operation
was initially recorded
came from a camera with
a larger imager, and the
click-balance point is
outside the border of the
image the action is trying
to color balance. You will not be able to use the
script with this image.
Message Possible Cause Suggested Solution