Kodak DCS 410 User Manual
Page 188
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7-46 Reference — Camera G
7. Unscrew the coupling nut at the top of the connector cable and pull
straight out to remove the connector cable from the Nikon N90s
camera.
Unscrew ( ) . . .
. . .then pull straight out.
8. Loosen the handstrap (do not remove it) by separating the Velcro
parts; you may need to slide the buckle down on the lower end of the
strap to loosen it.
9. Loosen the large mounting screw in the center of the base of the
camera back until it turns freely.
Mounting screw