Kodak DCS 410 - Manual (Page 213)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 Reference — Kodak Driver Software G 8-17
E. Take Picture Icon
Causes the camera to take a picture and display it in the driver image
window. There may be a very short delay to allow the camera to focus (if
supported by the camera).
To take a picture with this icon the camera must be connected to your
computer, the S
OURCE
must be C
AMERA
, and the camera must be on.
Since lighting, rotation, cropping, and naming data are maintained with
each image, the driver must assign initial values for these settings to every
new image when the image is displayed in the driver image window.
Refer to S
OURCE
Menu, C
AMERA
in this chapter for an explanation of these
starting values.
NOTES: You can not take a picture while the camera is accessing a PCMCIA card,
that is while the red camera light indicates activity on the PCMCIA card. There-
fore, you should not take pictures while images are being saved to archive files.
F. Camera Control Icon
This icon is active only when a camera is attached to the computer;
otherwise, it is dim.