Kodak DCS 410 User Manual
Page 192
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7-50 Reference — Camera G
6. Wipe off residue on the imager surface by wiping repeatedly straight
across the imager with a dry corner of the cleaning pad.
7. Gently lift the camera back, and examine the imager in the light to
determine if it has been cleaned successfully.
8. If the imager is still dirty, repeat steps 2 through 7.
9. Place the camera back on a flat surface and breathe gently on the
imager to fog its surface.
10. Wipe repeatedly straight across the imager with a dry corner of the
cleaner pad.
11. Gently lift the camera back, and examine it in the light to determine if
it has been cleaned successfully.
12. If there is still lint on the imager, repeat steps 9 through 11.