Kodak DCS 410 - Manual (Page 18)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
xviii
2 2 2 2 2 Introduction 2-1
KODAK Camera Back 2-3
Features 2-4
3 3 3 3 3 Quick Start 3-1
4 4 4 4 4 Preparing the Camera and the Computer 4-1
Using the AC Battery Charger/Adapter 4-3
Charging the Battery 4-4
Setting the SCSI ID on the Camera 4-8
Installing a SCSI Host Adapter (TWAIN PC Only) 4-13
Making the SCSI Connection 4-14
Camera as the Sole SCSI Device 4-14
Camera Used with Other SCSI Devices 4-18
Camera Used with a Macintosh PowerBook or a PC Laptop 4-24
Macintosh PowerBook with No External SCSI Devices 4-24
PC (for TWAIN driver) 4-26
Inserting and Removing a PCMCIA Card 4-27
Inserting a PCMCIA Card 4-27
Removing a PCMCIA Card 4-31
Installing the KODAK Driver 4-33
Accessing the Camera from the Driver 4-36
Special Instructions for TWAIN-compliant Software 4-36
Final Steps to the Driver Window 4-38
Updating Camera Firmware 4-40
Formatting a PCMCIA Card 4-42
Quitting — Disconnecting the Camera from the Computer 4-45
5 Using the Camera 5-1
Readying the Nikon N90s Camera 5-2
Turning Off the Camera 5-8