Kodak DCS 410 - Manual (Page 94)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5-4  Using the Camera G
4. Select any of the three automatic film advance modes — single frame
shooting (S), continuous low-speed shooting (L), or high-speed shoot-
ing (H). To do so, hold down the film advance mode (DRIVE) button
while rotating the command input control dial.
NOTE: The L and H settings provide essentially the same shooting rate.
MODE
ISO
DRIVE
OFF
Ps
Command input control dial
Film advance mode
S
Film advance mode button
5. Choose other settings as desired, with the exceptions noted below:

Multiple exposure mode is not supported. Only the first exposure
will be recorded.

You will not be able to shoot when the camera is in S focus
(Single Servo AF with Focus-Priority), if the camera cannot focus.