Kodak DCS 410 User Manual
Page 193
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Reference — Camera G 7-51
Reassembling the Camera
1. Remove the ESD wrist strap from the mounting screw and from your
wrist.
2. Push the threaded end of the mounting screw back into the camera
back.
Push
3. CAUTION: As you complete this step be certain that the thin wires
recede into their openings in the Nikon N90s camera and KODAK
camera back.
Hold down the camera back with one hand while you use the other
hand to push the camera body into place against the camera back.
4. Tighten the mounting screw.
Mounting screw