Kodak DCS 410 - Manual (Page 59)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 Preparing the Camera and the Computer G 4-15
3. Connect the AC battery charger/adapter to the camera as described
earlier in this chapter. Although this step is optional, we recommend it
whenever the camera is connected to a computer.
4. Select the appropriate SCSI cable for your Macintosh (with 25-pin
connectors at both ends), or PC (with a 50-pin SCSI2 HD connector at
one end and a 25-pin SCSI connector at the other end.).
IMPORTANT: Use only the cable supplied with the camera; do not use a
substitute cable.
MACINTOSH:
25-pin Connector 25-pin Connector
PC — for TWAIN driver:
25-pin SCSI Connector 50-pin SCSI2 HD Connector