Kodak DCS 410 - Manual (Page 180)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7-38  Reference — Camera G
You are losing images
from the PCMCIA card. An error occurred on
the card. Turn off the camera so that the
camera back goes off. Turn on the
camera and retry the operation. If
you continue to have problems,
reformat the PCMCIA card with
the Format button on the camera
control dialog box of the software
driver. (This will erase all existing
images from the card.)
If the problem persists, contact
Kodak.
Image data on the
PCMCIA card have
become corrupted; you
are unable to access the
image data. You may be using an
improper SCSI cable to
connect the camera
system to your
computer. Use only the supplied SCSI cables
(or other cables as specified in
Chapter 4 to attach the camera or
other peripherals to the computer.
Your SCSI chain is not
terminated properly. Ensure that the SCSI chain is
terminated properly as described
in Chapter 4.
The files have become
corrupted for an
unknown reason. If you have access to an IBM PC
or compatible computer with a
PCMCIA card reader and disk
utility software, you may be able
to recover image and sound files
with that utility software.
If that computer system is
unavailable or that action is
unsuccessful, you may need to
format the disk with the camera,
an operation which will erase all
of your data on the card.
Trouble Possible Cause Suggested Solution