Kodak DCS 410 - Manual (Page 229)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
 Reference — Kodak Driver Software G 8-33
F INAL O UTPUT
The data displayed by the values in the final output area provide the
width, height, resolution, and file size of the cropped area of the images.
R EMOVE
Removes the cropping rectangles from all selected images.
C ANCEL
Exits the dialog box, canceling changes you may have made to all op-
tions.
OK
Exits the dialog box, accepting all changes made to all options.
IMPORTANT: If multiple images were selected before cropping, clicking OK
applies the selected crop parameters to
all selected images.
C
ROP
N
EW
I
MAGES AFTER
S
HUTTER
R
ELEASE
If you turn “on” this checkbox (an X appears in the check box to the left of
this option when on), the most recent cropping rectangle that you have
created is superimposed on all new images you take; when “off,” no
cropping rectangle is applied to new images.
Navigation Buttons
If you select multiple images before you click the Crop icon, any changes
to the crop rectangle applies
to all of the selected images. For this reason,
the C
ROP
dialog box provides navigation buttons (identical in function to
those in the driver image window), which appear beneath the image. You
click these navigation buttons (first, previous, next, and last) to scroll
through the selected images; the current cropping rectangle appears on
each image as you scroll through them. This allows you to determine if
the cropping rectangle you have created provides the desired cropping