Konica Minolta DI3510 - Manual (Page 238)

11
Specifying Copy Settings
11-6 Di2510/Di3010/Di3510
To make copies using a stapling setting
1
Position the document(s) to be
copied.
❍ For details, refer to “10 Original
Documents”.
2
Touch [Sort], and after selecting
your desired sorting mode, touch
staple mode.
❍ If “Corner Staple” was selected,
skip to step 6.
❍ If “2-Point Staple” was selected, continue with step 3.
3
Touch [Select Position].
4
Touch the button for the desired
stapling position.
5
Touch [Enter].
6
Press the [Start] key.
The copies are printed.
✎
Note
A stapling setting cannot be selected if another job has been
interrupted.
When making copies while using a staple setting, be careful of the
selected stapling position.
For details, refer to page 11-10.