Konica Minolta DI3510 - Manual (Page 134)

7
Utility Mode Operations
7-18 Di2510/Di3010/Di3510
To set the “Auto Panel Reset” function
This function is used to specify when the Basics screen is automatically
displayed if no operation is performed while a program or settings are
being specified.
1
Press the [Utility] key.
2
Touch [User’s Choice].
3
Touch [3/6], and then touch [Auto
Panel Reset].
4
Select the desired length of time
until the Basics screen is displayed,
and then touch [Enter].
❍ The length of time until the
Basics screen is displayed can
be set to 30 seconds, 1, 2, 3 or 5
minutes, or “No Reset”.
5
Touch [END] to return to the Utility
screen, and then touch [Exit] to return to the Basics screen.