Konica Minolta DI3510 - Manual (Page 163)

Administrator Management Operations
8
Di2510/Di3010/Di3510 8-7
To allow access to Administrator mode, turn the machine off, then
on again.
5
Touch [New Code], and then use
the 10-Key Pad to type in the new
8-digit administrator code (Admin.
Password).
❍ Press the [C] key to erase all
entered text.
❍ To return to the previous screen,
touch [Cancel].
✎
Note
If the entered administrator code does not have 8 digits, the
message “Incorrect code and new administrator. Input
administrator code.” appears. Type in an 8-digit administrator
code.
6
Touch [Retype New Code], and
then use the 10-Key Pad to retype
the new 8-digit administrator code
(Admin. Password).
❍ Press the [C] key to erase all
entered text.
❍ To return to the previous screen,
touch [Cancel].
✎
Note
If the entered administrator code does not have 8 digits, the
message “Incorrect code and new administrator. Input
administrator code.” appears. Type in an 8-digit administrator
code.
7
Touch [Enter].