To set the “language selected for lcd” function, To set the “language selected for lcd” function -8 – Konica Minolta DI3510 User Manual
Page 124
7
Utility Mode Operations
7-8
Di2510/Di3010/Di3510
To set the “Language Selected for LCD” function
This function is used to specify the language for the screens that appear
in the touch panel.
1
Press the [Utility] key.
2
Touch [User’s Choice].
3
Touch [1/6], and then touch
[Language Selected for LCD].
4
Select the desired language, and
then touch [Enter].
5
Touch [END] to return to the Utility
screen, and then touch [Exit] to
return to the Basics screen.