Konica Minolta DI3510 - Manual (Page 165)

Administrator Management Operations
8
Di2510/Di3010/Di3510 8-9
Disable Sleep Mode
This parameter is used to disable the Sleep function, which automatically
turns off the printer heater after no operation is performed for a specified
length of time.
To disable the Sleep mode
1
Follow the procedure described in
“To display the Administrator
Management screens” on page 8-1 to display the Administrator
Management screen.
2
Touch [Admin. 1], and then touch [Admin. Set].
3
Touch [Disable Sleep Mode].
4
Touch [Yes] or [No], and then touch
[Enter].
❍ If [Yes] is selected, [No Reset]
appears in the screen for the
“Sleep Mode Setting” function,
which is available from the
User’s Choice screen.
5
On the User’s Choice [3/6] sleep mode setting screen, select [No].
6
Continue touching [Enter] to return to the Utility screen, and then touch
[Exit] to return to the Basics screen.