Konica Minolta DI3510 - Manual (Page 138)

7
Utility Mode Operations
7-22 Di2510/Di3010/Di3510
To set the “Default Copy Output Levels” function
This specifies the auto and manual default printing density level settings.
1
Press the [Utility] key.
2
Touch [User’s Choice].
3
Touch [4/6], and then touch [Default
Copy Output Levels].
4
Select the desired settings, and
then touch [Enter].
❍ The default Auto density level
can be set to [Lighter], [Normal]
or [Darker].
❍ The default Manual density level
can be adjusted by one level at
a time.
5
Touch [END] to return to the Utility screen, and then touch [Exit] to
return to the Basics screen.