Konica Minolta DI3510 - Manual (Page 146)

7
Utility Mode Operations
7-30 Di2510/Di3010/Di3510
To set the “Density (ADF only)” function (Only when the duplexing
document feeder is installed)
This function is used to adjust the density level when the optional
duplexing document feeder is used.
1
Press the [Utility] key.
2
Touch [User’s Choice].
3
Touch [6/6], and then touch [Density
(ADF only)].
4
Select the desired default setting,
and then touch [Enter].
❍ The setting on the left is most
appropriate for scanning normal
documents (such as those
created with a word processor).
❍ The setting on the right is most
appropriate for scanning faint
document (such as those written
with pencil).
5
Touch [END] to return to the Utility screen, and then touch [Exit] to
return to the Basics screen.