10 “black-white reverse” function, Reversing white- and black-colored areas of copies, To set the “black-white reverse” function – Konica Minolta DI3510 User Manual
Page 115: Black-white reverse” function -19
Auxiliary Functions
6
Di2510/Di3010/Di3510
6-19
6.10
“Black-White Reverse” Function
Reversing White- and Black-Colored Areas of Copies
Copies can be printed with the white- and black-colored areas of the
original image reversed.
✎
Tip
The white and black colors of the distribution number and watermark
will not be reversed.
The white and black colors of the original cannot be reversed after the
document has been scanned.
To set the “Black-White Reverse” function
1
Load the document into the duplexing document feeder or position it
on the original glass.
2
Touch [Auxiliary], and then touch
[Black-White Reverse].
3
Press the [Start] key.
The copies are printed.