To set the “output tray” function (optional), To set the “output tray” function (optional) -26 – Konica Minolta DI3510 User Manual
Page 142
7
Utility Mode Operations
7-26
Di2510/Di3010/Di3510
To set the “Output Tray” function (optional)
This function is used to specify how copies and computer printouts are
separated and which output tray they are assigned to.
✎
Tip
[Output Tray] only appears if the finisher or the job separator is
installed.
1
Press the [Utility] key.
2
Touch [User’s Choice].
3
Touch [5/6], and then touch [Output
Tray].
4
Select the appropriate output tray
settings, and then touch [Enter].
5
Touch [END] to return to the Utility
screen, and then touch [Exit] to
return to the Basics screen.