Konica Minolta DI3510 - Manual (Page 149)

Utility Mode Operations
7
Di2510/Di3010/Di3510 7-33
7.5 Viewing Counters (“Meter Count” Function)
With the “Meter Count” function, the following counters can be viewed.
To view the counters
1
Press the [Utility] key.
2
Touch [Meter Count].
3
After checking the various counters,
touch [Exit].
❍ There are two Meter Count
screens. To view the other
screen, touch [Next].
4
Touch [Exit] to return to the Basics
screen.
Counter Function
Total counter This counter shows the total number of copies and printouts
made since the copier was installed.
Copier Total counter This counter shows the total number of copies made.
Copier Size counter This counter shows the total number of copies made on the
specified paper size. (The paper size that is counted should
be set at the service center)
Copier 2-Sided counter This counter shows the total number of double-sided copies
made.
Printer Total counter This counter shows the total number of printouts made.
Printer Size counter This counter shows the total number of computer printouts
made on the specified paper size. (The paper size that is
counted should be set at the service center)
Printer 2-Sided counter This counter shows the total number of double-sided
computer printouts made.
Scanner counter This counter shows the total number of pages that have
been scanned.
Account Total counters These counters show the total number of copies and
printouts made for each account currently registered. (A
counter for each registered account is listed.)