Konica Minolta DI3510 - Manual (Page 133)

Utility Mode Operations
7
Di2510/Di3010/Di3510 7-17
To set the “LCD Back-light Off” function
This function is used to specify when the backlight for the touch panel
automatically goes off after no operation is performed for the set length of
time.
1
Press the [Utility] key.
2
Touch [User’s Choice].
3
Touch [3/6], and then touch [LCD
Back-light Off].
4
Press the [C] key to erase the value.
❍ Use the 10-Key Pad to specify
the desired length of time, and
then touch [Enter].
(Specify a length of time
between 1 and 240 minutes.)
✎
Tip
If the preheat and sleep settings are short because of the LCD
Back-light being set to off, then the Backlight will be turned off after
the specified preheat or sleep time.
5
Touch [END] to return to the Utility screen, and then touch [Exit] to
return to the Basics screen.