Konica Minolta DI3510 - Manual (Page 150)

7
Utility Mode Operations
7-34 Di2510/Di3010/Di3510
7.6 Using Copy Programs
Up to 10 sets of copy settings can be stored as copy programs.
To store a copy program
1
Press the [Mode Check] key.
2
Touch [Job Mem Input], and then
touch the number where you wish to
store the copy program.
❍ Number buttons on which
does not appear have already
been assigned a copy program.
If a button that has already been
programmed is selected, the
previously assigned copy
program is deleted.
3
Touch [Check], and then touch a number button.
4
Check the programmed settings.
❍ To display screen 2/2, touch
[Next]. To return to screen 1/2,
touch [Back].
5
Touch [Enter] to return to the Mode
Check screen, and then touch [Exit]
to return to the Basics screen.