Siemens SE105 User Manual
Page 94
![background image](/manuals/155574/94/background.png)
93
Appendix
Gigaset Router / de / A31008-E105-B100-2-19 / appendix.fm / 05.06.2003
You cannot connect to the
Internet.
◆
Check that you are using the right cable to connect
to the modem. Depending on the modem you are
using, the cable must have either straight or cross
wiring. Please consult your modem operating
instructions. The Ethernet cable supplied has
straight wiring.
◆
Check whether the Auto-reconnect option has
been deactivated (for PPPoE or PPTP connections).
In this case, connections cannot be opened
automatically.
Select Auto-reconnect. Remember that this setting
may lead to higher costs if you are billed on the time
used.
◆
If the Auto-reconnect option has been activated,
perhaps the connection was terminated manually
on the Status tab using the Disconnect button.
– Open the connection manually using the Connect
button again or
– restart your router.
In both cases, the Auto-reconnect setting will be
active again.
You cannot open a
connection from a wireless
device to the Gigaset Router.
The wireless network adapter is not using the correct
SSID.
◆
Change the SSID on the network adapter.
WEP encryption has been activated on the Gigaset
Router but not on the wireless network adapter or it is
using the wrong WEP key.
◆
Activate WEP encryption on the network adapter
with the correct key.
If you do not know the key, you will have to reset
your router. To do this, hold down the reset button
on the back of the router for at least five seconds.
Warning: Please bear in mind that this will restore all
configuration settings to the factory settings.
Symptom
Possible cause and solutions