Siemens SE105 User Manual
Page 81
80
Configuration with Advanced Setup
Gigaset Router / de / A31008-E105-B100-2-19 / configure_router.fm / 05.06.2003
Enabling only selected PCs to access your local network
In the MAC filtering table you can enter up to 32 PCs that are allowed to access your
local network. All other computers will be denied access. Access control is based on the
.
◆
In the Firewall menu, select MAC filtering table.
◆
Activate the Yes option next to MAC Address Control so that the MAC addresses of
accessing PCs are checked.
There are two ways of making entries in the MAC filtering table:
◆
Enter the MAC addresses of those PCs you want to have access manually in Client
PC MAC address.
◆
, all the PCs that are currently logged in will appear in the
DHCP Client list at the bottom of the page. Select a PC, decide in which row of the
table the entry is to appear and click on Copy to. The MAC address of the selected
PC will be transferred to the table.
◆
Once you have entered all the PCs you want, click on APPLY.
!
If you have activated the MAC address filter, you should enter at least one
PC from which you can configure the router. Otherwise you will not have
any access to the router's user interface. If you have accidentally denied
router access for all the PCs, you will have to completely reset the router.
To do this, hold down the reset button on the back of the router for at
least five seconds.