Defining address mapping – Siemens SE105 User Manual

Page 75

Configuration with Advanced Setup

Gigaset Router / de / A31008-E105-B100-2-19 / configure_router.fm / 05.06.2003

Defining Address mapping

In the default setting, all the local PC IP address are mapped to your router's public IP

address. If you have a large number of users on your local network, it may be advisable

to order several IP addresses from your Internet Service Provider. Then use address

mapping to define which local IP addresses will connect to the Internet via which public

IP address.

◆

In the NAT menu, select Address mapping.

◆

Enter the public IP addresses you want to share in the Global IP boxes.

◆

Enter in the line underneath the range of local IP addresses that are to share this

public IP address.

◆

To apply the settings click on APPLY.

Remember that connections via several IP addresses through the WAN

port can lead to bottlenecks because all the connections have one

hardware interface.