Siemens SE105 - Manual (Page 49)

48
Gigaset Router User Interface
Gigaset Router / de / A31008-E105-B100-2-19 / configure_router.fm / 05.06.2003
Working area
Use the working area for configuration.
With configurable parameters you will see a dialogue box or selection list with default
settings. There may be some limitations on the possible entries, e. g. entering special
characters or certain value ranges. If your entry does not meet the rules for the box in
question, you will see an error message. You can then repeat the input.
Once you have made any configuration changes on a page, you can activate the new
setting by clicking on APPLY or NEXT at the bottom of the page.
Buttons
Other buttons may be visible depending on the function in question. These are
described in the relevant sections.
i
Please read the following information if you are using
Internet Explorer 5.0.
Once you have entered the command, the page will be properly updated
if you have configured Internet Explorer as follows:
In Extras – Internet options – General – Temporary Internet files –
Settings the setting for Check for newer versions of the saved pages
should be set to For every visit to the page.
Basic Setup NEXT Opens the page for the next configuration step.
BACK Returns to the previous configuration step.
CANCEL Deletes all the entries on page since the last time it was
opened.
FINISH Transfers the settings you have made to the router
configuration.
HELP Displays help information about the current page.
Advanced
Setup:
APPLY Transfers the settings you have made to the router
configuration.
CANCEL Deletes all the entries on page since the last time APPLY
was run.
HELP Displays help information about the current page.