Connecting the gigaset router, Connecting a dsl or cable modem to the router – Siemens SE105 User Manual
Page 14
13
First Steps
Gigaset Router / de / A31008-E105-B100-2-19 / device.fm / 05.06.2003
Connecting the Gigaset Router
Before you start connecting PCs to your Gigaset Router make sure that
◆
is connected to the PC. Please read the
operating instructions that came with the adapter.
◆
ConnectionPoint has been entered as
on the network adapter.
Connecting a DSL or cable modem to the router
Connect the socket on the back of the router marked WAN and your DSL or cable
modem with an Ethernet cable.
!
◆
Only use the (9V 1A) power supply unit supplied with the router.
◆
Do not plug any phone jack connectors into the router WAN and LAN
sockets.
◆
Use standard network cables for all connections (CAT-5) for the WAN
and LAN connections.
◆
An Ethernet cable must not be longer than 100 meters (328 feet).
i
Use a 100-Ohm shielded or unshielded 3, 4 or 5 category Ethernet cable
with RJ-45 jacks on both ends for all connections.
Please bear in mind that the cable you use must be the right one for the
modem (straight or crossed wiring). Please consult your modem
operating instructions. The Ethernet cable supplied has straight wiring.
DSL or cable modem
Gigaset SE 105 dsl/cable