Siemens SE105 User Manual

Page 35

Configuring the local network

Gigaset Router / de / A31008-E105-B100-2-19 / configure_tcpip.fm / 05.06.2003

Synchronising the TCP/IP settings with the Gigaset Router

You have now configured your computer so that it is ready to be connected to the

Gigaset Router. You now have to release the old TCP/IP settings and update them with

the settings of your Gigaset Router.

◆

Click on Start in Windows Desktop and then Programs, followed by Accessoires

and finally command prompt.

◆

In the command prompt window enter the
ipconfig /release

command and press the ENTER KEY.

◆

Then enter the
IPCONFIG /RENEW

command and press the ENTER KEY.

If the router's default IP address (192.168.2.1) was not changed, the IP address

should now read 192.168.2.x (with x being a number between 2 and 254. The

Subnet mask must always be 255.255.255.0 and the Default Gateway must have

the router's IP address (192.168. 2.1). These values confirm that your Gigaset Router

is working.

◆

Enter EXIT and press the Enter Key to close the command prompt window.