Installing the tcp/ip protocol – Siemens SE105 User Manual

Page 21

Configuring the local network

Gigaset Router / de / A31008-E105-B100-2-19 / configure_tcpip.fm / 05.06.2003

Installing the TCP/IP protocol.

The

protocol ensures that the PCs in the network can communicate with each

other. You first have to install this

for the network adapter that establishes the

connection to the Gigaset Router.

◆

In the Network window move from the Identification to the Configuration tab.

◆

In the Network window, check that there is a

TCP/IP > entry for your network card or network adapter in the list of components. If

for example you are using a Gigaset USB Adapter 11 as the wireless network adapter,

the list must contain the entry TCP/IP > Siemens Gigaset USB-Adapter 11.

◆

If the entry does not exist, click on Add.

◆

Select as network component type Protocol and click on Add.

◆

Select in Manufacturer the entry Microsoft and in Network protocol the entry

TCP/IP before confirming with OK.