Activation – Siemens SE105 User Manual

Page 17

Text mode
Original mode

First Steps

Gigaset Router / de / A31008-E105-B100-2-19 / device.fm / 05.06.2003

Activation

Plug the power unit cable into the 9V 1A socket on the router. Plug the other end of the

power unit cable into a power outlet.

This will activate the router. Check whether the LED display for the mains (PWR) on the

front panel is lit up. If this is not the case, please turn to "Fault tracing" on page 92.
The wireless link to the PCs connected via a wireless network adapter will be established

automatically if their network adapters have been configured with the same

SSID

as the

router (see page 14). It can take a few seconds for the wireless connection to be

established.