Siemens SE105 - Manual (Page 36)

35
Configuring the local network
Gigaset Router / de / A31008-E105-B100-2-19 / configure_tcpip.fm / 05.06.2003
Network configuration with Windows 2000
To integrate a PC in a network with Windows 2000 via a Gigaset Router:
1. Install the network services (see below).
2. Select computer names and workgroup (see page 36).
3. Install the TCP/IP protocol (see page 37).
4. Make TCP/IP protocol settings (see page 39).
5. Deactivate the http proxy (see page 41).
6. Synchronise the TCP/IP settings with the Gigaset Router (see page 42).
Installing network services
You have to install the network services before the PCs in your network can access
shared resources. This can be done as follows:
1. Click on Start – Settings – Control Panel.
◆ Double click on the Network and Dial-up Connections icon.
◆ In the left-hand pane click on Add network components.