Lan configuration, N "lan configuration – Siemens SE105 User Manual

Page 69

Configuration with Advanced Setup

Gigaset Router / de / A31008-E105-B100-2-19 / configure_router.fm / 05.06.2003

LAN Configuration

You can use LAN configuration to

◆

define an IP address for the router and

◆

define whether the router should automatically assign the IP addresses for the PCs

in your local network or not.

The default IP address for the router is 192.186.2.1. This is the router's

. This is the address under which the router can be reached on the local network.

It can be freely assigned from the block of available addresses. The IP address under

which the router can be reached from outside is assigned by the Internet Service

Provider.
The router has a

, whose factory setting is active. Thus the PCs' IP addresses

are automatically assigned by the router. If you want to assign static IP addresses for the

PCs, you will have to deactivate the DHCP server.

◆

Select LAN in the menu bar.

◆

If the router's DHCP server is active, configure the PCs' network

settings so that the Obtain an IP address automatically option is

checked. To find out how to do this, please turn to page 17 in

◆

If you deactivate the router's DHCP server, you will have to assign a

static IP address for the PCs using the network settings. This is

described in Practical Tips and Configuration Examples on the

supplied CD.