Siemens SE105 - Manual (Page 61)

60
Configuration with Advanced Setup
Gigaset Router / de / A31008-E105-B100-2-19 / configure_router.fm / 05.06.2003
System Configuration
You can use the Gigaset Router's system configuration
◆ to set or change the country (see below),
◆ to set or change the time zone (see page 60),
◆ to assign a password for accessing the router's user interface (see page 62),
◆ to enable access to the router user interface via a PC that is not on the local network
(remote management) (see page 63).
Setting the Country
You can use this page to set the country for the router. The country setting automatically
sets the channel normally used for wireless connections in that country. You can change
the channel on Channel and SSID (see page 70).
If you have configured your router with Basic Setup, this setting has already been made
and can be changed here.
◆ In the System menu, select Country.
◆ If you want to change the setting, select the new country and click on APPLY.
Setting the Time Zone
Information on the time zone is important for various time-dependent operations on
the Internet. For example, the data packets sent in a particular country have to be sorted
in the correct chronological order in the receiver's country. Access control to particular
services can also be defined using time-based rules.
If you have configured your router with Basic Setup, the time zone was automatically
defined appropriately for your setting for the Country. You can change the setting here.
◆ In the System menu, select Time Zone.