Gigaset router user interface, Launching the user interface – Siemens SE105 User Manual

Page 45

Gigaset Router User Interface

Gigaset Router / de / A31008-E105-B100-2-19 / configure_router.fm / 05.06.2003

Gigaset Router User Interface

Once you have configured the network settings on a PC in your local network, you can

then use that PC to configure the Gigaset Router with the user interface. The Gigaset

Router can be configured using any browser that supports Java, e.g. Microsoft Internet

Explorer 5.5 or higher, Netscape Communicator 6.0 or higher.
The Gigaset Router user interface includes Basic Setup and Advanced Setup.

Launching the User Interface

To access the Gigaset Router's user interface:

◆

Launch your Web browser.

◆

Enter the router IP address in the Web browser address bar.
http://192.168.2.1
You will then see a login window:

Basic Setup

Use Basic Setup for the settings required for connecting to the

Internet via a DSL or cable modem. This is described from

Advanced Setup

Advanced Setup provides additional functions. Here, for example,

you can assign a password, configure and activate firewall

functions, back up and restore the configuration data and much

more besides. These configuration steps are optional and can be

carried out at a later stage. This is described from page 59 on.