Seiko Instruments SII Black-and-White Raster Plotter LP-1020 - Manual (Page 98)

3-8
PDL menu
The various print parameters can be set in the PDL table from the Panel
setup menu. The PDL processing program performs print processing in
accordance with the print parameter settings.
Setting each print parameter allows for convenient operation by allowing
you to change how paper is fed and delivered, and enables you to reduce
the scale of a drawing.
When using our company’s printer driver
When using our company’s printer driver (when the print driver
“OPTION SHEET” from “OUTPUT PROCESS SELECT” in
“FORMAT” has been set to C2VR), the printer parameters set for this
device are disabled and printing is performed in accordance with the print
parameters set for the print driver (printing in accord with the print driver
settings).
If you wish to enable the PDL menu print parameters using our
company’s print driver, go to Format parameters and set the “PRINT
DRIVER” to “DISABLE” (initial parameter is print driver: disabled).
“PRINT DRIVER” ENABLE / DISABLE / CHINESE
However, as all print parameters set for the printer driver are disabled by
this action, set the each print parameter as required on the device.
To operate the device with China series paper using the print driver, set
the print driver to Chinese. In this case, operation will be performed as
base table plotting.