Seiko Instruments SII Black-and-White Raster Plotter LP-1020 - Manual (Page 205)

12-7
▼Setting items
Chapter 12 Ethernet parameter "ETHERNET"
SETUP DETAILS
Specifies details of other Ethernet items.
■ROUTING TABLE 2
Specifies the routing table from the second to tenth items of this device.
It is used to connect this device to a host of other network.
●GATEWAY ADDR [Gateway address 02-10]
Specifies the router IP address.
000.000.000.000 to
255.255.255.255
Default value: 000.000.000.000
●NETWORK ADDR [Network address 02-10]
Specifies the network address.
000.000.000.000 to
255.255.255.255
Default value: 000.000.000.000
◆ If the gateway address is not set (000.000.000.000), it is
not displayed.
Note