Seiko Instruments SII Black-and-White Raster Plotter LP-1020 - Manual (Page 96)

3-6
Menu name
Setup —— PORT n—HPGL
—— PORT n—DSCAN
—— PORT n—TIFF
—— PORT n—CALS
:
—— PARA—CALS
—— USB—HPGL
(1) Setup menu
Change the settings for each PDL in Setup menu listed below:
Note:
Disabled ports will not be indicated (refer to Port select in the System menu).
Only the PDL selected via PDL Select is displayed (refer to PDL Select in the
Protocol menu).
Parallel and USB will only be indicated when each interface is installed. USB will
only indicate HPGL.