Seiko Instruments SII Black-and-White Raster Plotter LP-1020 - Manual (Page 215)

13-5
▼Setting items
Chapter 13 Terioplot
Restrictions
There are the following restrictions when the plotter is connected with the
Terioplot computer and operated.
●Receiving print data via network connection
Only the host computer where Terioplot is installed can receive print data
via a network connection.
●Receiving print data via USB or parallel connection
Print data cannot be received via USB or parallel connection. In addition,
the USB and parallel communications settings cannot be displayed on the
operation panel or in the PDL setup over the web or communication
parameters.
●WEB function
A web connection can only be established with the host computer where
Terioplot is installed.
●SNMP setting
When “Terioplot” is set to “ON” in this plotter, the SNMP setting is
regarded as “ON” even if it is set to “OFF”, and the plotter runs.