Seiko Instruments SII Black-and-White Raster Plotter LP-1020 - Manual (Page 138)

5-20
Error memo
Paper feed
direction Cut position
Drawing
■REVERSE (TIFF, CALS only)
Allows for setting whether reverse plotting (with black and white
inverted) is made or not. This setting is performed on the third hierarchy.
: Default value
OFF Reverse plotting is not performed.
ON Reverse plotting is performed.
■ERROR MEMO
Allows for setting whether to attach an error memo beside the plotting if a
command error or other PDL error occurs. This setting is performed on
the third hierarchy.
: Default value
ON If a PDL error occurs during data processing, an error memo is
attached to the side of the drawing while it is being printed.
SPECIAL If an PDL error occurs during data processing, an error memo
is attached to the side of the drawing while it is being printed.
For the command error only, the error memo is not printed.
(HP-GL only)
OFF Error memo is not attached.
■PlotDataToFile
Since this setting is only for Japan, leave the setting as it is.