Seiko Instruments SII Black-and-White Raster Plotter LP-1020 - Manual (Page 81)

2-39
Chapter 2 Basic operations
Pressing the key during printing takes the device offline and allows
you to temporarily stop printing by pressing the key.
Pressing the key during printing gives you the option to cancel the
drawing being printed.
Pressing the key during Print stop status allows the device to be
returned to Online status and to continue printing.
Print stop
Press the key during printing and set the device to Print stop status.
When a drawing has already begun printing, printing will be stopped after
the printing of that drawing is completed. Printing of the next drawing
will not be executed.
The Print stop status appears on the following offline display and enables
each offline process to be executed.
Continue printing
From the Print stop status, pressing the key again returns the device
to online status and it will continue printing.
P R I N T 0 1 / 0 1 ✽ S 0 0 1
F 0 1 H P G L J 0 0 9
Pause, continue, cancel (and additional printing)
M E N U
# S E T U P