Seiko Instruments SII Black-and-White Raster Plotter LP-1020 - Manual (Page 105)

3-15
Chapter 3 Menu overview
Protocol menu “PROTOCOL”
Press the key on the display below to enter the Protocol menu.
After changing these settings, the system will reset.
▼Menu screen
Press the key.
Menu Item Function
PORTn : xxx The Ethernet port PDL selection and protocol name are
set here. N indicates the port number, xxx indicates the
Ethernet protocol type. Up to 10 ports may be specified.
Protocol To set the protocol name, XPT sets the XPT port, LPD
sets the printer name, and FTP sets the user name.
PARALLEL Performs the PDL selection for the parallel channel.
M E N U
# P R O T O C O L
P R O T O C O L
# P O R T 1 : X P T