Samsung Behold II SGH-t939 - Manual (Page 167)

Changing Your Settings 164
3. From the Home screen, touch Dialer, then press and hold the key until the “Vibration profile on”
message displays. In Vibration mode, instead of sounds, your phone vibrates.
4. To exit and reactivate the previous sound settings, touch and hold the key again until the “Normal
profile on” message displays. The Vibration profile icon no longer displays.
Editing the Vibration Profile
To change the vibration intensity:
1. From the Home screen, touch Quick List ➔ Settings ➔ Sound profiles.
2. Touch the Vibration profile, then touch Edit.
3. Slide the Vibration intensity slide bar up or down to set the intensity of the vibration, then touch Save.
Driving
In this case, the speaker is active and launches the currently selected Call alert type when the associated
notification is activated.
Call
1. From the Home screen, touch Quick List ➔ Settings ➔ Sound profiles.
2. Touch the Driving profile.
3. Touch Edit.
4. Touch the Pull down menu and select Call.
5. Touch the Call alert type field, select one of the following and touch Save.
• Melody: the phone rings using the ring melody selected in the Ring tone menu.
• Increasing melody: the melody volume increases.
• Vibration & melody: the phone vibrates and plays a melody simultaneously.
• Vib. & increasing melody: the phone vibrates and the melody increases simultaneously.
6. Touch the Ringtone field, touch to select a ringtone and touch Save.
7. Touch the Call alert volume slider and drag the slider to the volume level you desire (range is 0-7).
#
#